Rich Table of Contents
- How Heavy Haul works From Alabama to Arkansas
- Heavy Haulers from Alabama to Kansas
- About We Will Transport It
- The Route From Alabama to Arkansas
- Below are some examples of prices to ship heavy equipment from Alabama to Arkansas:
- The most popular trailers we use:
- Heavy haul jobs done from Alabama to Arkansas
How Heavy Haul works From Alabama to Arkansas
About We Will Transport It
Are you in need of a heavy equipment shipment from Alabama to Arkansas? If you need a company to handle your transportation needs, We Will Transport It is the company for you. Our heavy hauling experience spans more than a decade. Transporting heavy equipment in all 50 states is one of We Will Transport It’s specialties. Regardless of the size of your equipment, we have a trailer that will suit it and a team that is ready and willing to assist you with the move. Our knowledgeable representatives will handle every detail and keep you informed throughout the shipping process, whether it is a full load, partial load, or even an oversized load.
The Route From Alabama to Arkansas
The route from Alabama to Arkansas runs north and then west via I-22. From Alabama, your equipment will pass through Mississippi into Arkansas. The distance between the center of Alabama and the center of Arkansas is 454 miles. The total trip will take roughly 8 hours. The price of transport is based on two factors, the size and weight of the equipment and the number of miles the unit is being moved.
Below are some examples of prices to ship heavy equipment from Alabama to Arkansas:
|From To||Shipping Quote||Miles|
|Birmingham Alabama, 35217 to Little Rock Arkansas, 72204||$2,050||380 miles|
|Huntsville Alabama, 35806 to Jonesboro Arkansas, 72404||$1,990||285 miles|
|Tanner Alabama, 35671 to Brookland Arkansas, 72417||$1,980||275 miles|
|Trussville Alabama, 35173 to Little Rock Arkansas, 72210||$2,125||416 miles|
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Container Trailer
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
What is their method of transporting huge excavators?
Lowboy trailers are most suitable since they can accommodate the tall size and heavy weight of excavators. A trailer with more axles can haul up to 80,000 pounds and have a greater hauling capacity. According to some states. A trailer has to be loaded with care when an excavator is being loaded.
How to ship a backhoe the best way?
Shipping a backhoe loader via an open-air trailer, such as a flatbed truck, is recommended by A-1 Auto Transport. With closed trailers, it is always a question whether the equipment would even fit inside the container because of its rather unusual shape.
An excavator needs to be transported in what way?
For example, smaller excavators can be transported on trailers capable of carrying 10,000 pounds of weight, while larger excavators may need a trailer that can handle 20,000 pounds or more.
Heavy haul jobs done from Alabama to Arkansas
One of the most recent shipments by our company was a Caterpillar 416B Backhoe. We picked up this 416B Caterpillar backhoe in Hope Hull, AL, 36043 and delivered it to Little Rock, Arkansas, 72002 a distance of 366 miles. There were 27 feet of length, 7 feet of width, and 10 feet of height on this backhoe, which weighed 14,000 pounds.
I recently moved a 77,000 lb Komatsu WA500-6 Wheel Loader that was 32 ft long, 10.5 ft wide, and 12.4 ft high from Alabama to Arkansas. An approximate 458 miles distance separates Louisiana and Mississippi. In order to move this item, permits were required for its width, height, and overweight.