Rich Table of Contents
- How Heavy Haul works from Colorado to New York
- Heavy Haulers from Colorado to New York
- About We Will Transport It
- The Route Between Colorado and New York
- Below are some examples of prices to ship Heavy Equipment from Colorado to New York:
- The most popular trailers we use:
- FAQs
- Heavy Haul jobs done from Colorado to New York
How Heavy Haul works from Colorado to New York
Book online
Pickup
Shipping
Delivery
Heavy Haulers from Colorado to New York
5 Star Heavy Equipment Transport Company from Colorado to New York for quality hauling. We provide stress-free machinery hauling from/to Colorado to New York and on-time delivery for local and long distance.
About We Will Transport It
Are you looking for a company to ship your heavy equipment from Colorado to New York? We Will Transport It is the company for you. We specialize in heavy hauling in and out of all 50 states. We can even ship your heavy equipment internationally. We are a company with over a decade in the shipping industry. We are equipped with every type of trailer one can imagine. No matter the size of your unit, we can ship it safely. We have the knowledge and experience to get the job done for you with ease.
The Route Between Colorado and New York
The most common route from Colorado to New York runs east via I-80 East. From Colorado, you will pass through Nebraska, then Iowa, Indiana, Ohio, Pennsylvania, and finally into New York. The distance from the center of Colorado to the center of New York is about 1,842 miles. The trip will generally take between two and three days. The price of transport will be determined by two factors, the number of miles from pick up to drop off and the size and weight of the equipment.
Below are some examples of prices to ship Heavy Equipment from Colorado to New York:
| From To | Shipping Quote | Miles |
|---|---|---|
| Aspen, Colorado 81611 to Southampton, New York 11968 | $3,030 | 2,020 miles |
| Aurora, Colorado 80015 to Brooklyn, New York 11247 | $2,695 | 1,797 miles |
| Colorado Springs, Colorado 80905 to Niagara Falls, New York 14301 | $2,389 | 1,593 miles |
| Denver, Colorado 80201 to Buffalo, New York 14223 | $2,301 | 1,534 miles |
| Highlands Ranch, Colorado 80126 to Syracuse, New York 13201 | $2,539 | 1,693 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
FAQs
How does Colorado define oversize loads?
At least one week prior to the shipment date, loads larger than 17 feet wide and weighing more than 200,000 pounds must submit an application to the state. Over 17’6″ tall loads require utility clearance letters.
Can you tell me what Colorado’s overweight limit is?
Axle Regulations for Colorado. A tandem weighs 34,000 pounds. The gross weight of the vehicle is 80,000 pounds. In pounds per inch of tire width, the maximum load per tire shall be: Steering Axle 600 lbs./inch All other Axles 500 lbs./inch.
How wide can you haul without a permit?
There are some general guidelines that you can expect to meet across the United States, despite state-by-state variations:
- Twelve feet is the standard width of a highway lane.
- An oversize load is one that exceeds 8.5 feet wide and requires a state permit.
- There is a maximum height limit of 12.5 to 14.5 feet.
Suggested links
Heavy Haul jobs done from Colorado to New York
Two forklifts going from Pueblo County, Colorado 81019 to New York City, New York 10001. Each fork lift was 6 long, 3 wide, 6.8 Height and the customer was going to load and offload. With forklifts you need to have a trailer that has mega ramps, so they won’t bottom out and hit the ground . We dispatched out a step deck with 16 ft ramps. The total time of transit was two days.
