
Rich Table of Contents
Heavy Equipment Transport from Illinois to Georgia
Book online
Pickup
Shipping
Delivery
Heavy Haulers from Illinois to Georgia
5 Star Heavy Equipment Transport Company from Illinois to Georgia for quality hauling. We provide stress-free machinery hauling from/to Illinois to Georgia and on-time delivery for local and long distance.
About We Will Transport It
When transporting your heavy equipment from Illinois to Georgia, it is best to book your transport with a company that has decades of experience doing just that. We Will Transport It is skilled and experienced in shipping heavy equipment to and from all 50 states. Whether you are shipping a forklift, crane, or even a tiny house, our team of experts can get the job done for you at a reasonable rate.
The Route From Illinois to Georgia
The route from Illinois to Georgia is a run southeast via I-24 East. From Illinois, you will pass through Kentucky, Tennessee, and then enter Georgia. The distance from the center of Illinois to the center of Georgia is 842 miles. The trip will generally take between one and two days. The price to transport will be determined by two factors, the size and weight of the equipment and the number of miles being travelled.
Below are some examples of prices to ship heavy equipment from California to Texas
From To | Shipping Quote | Miles |
---|---|---|
Chicago Illinois, 60604-Atlanta Georgia, 30334 | $2,300 | 716 miles |
Des Plaines Illinois, 60016-Duluth Georgia, 30097 | $2,330 | 754 miles |
Joliet Illinois, 60433-Buford Georgia, 30518 | $2,325 | 733 miles |
Sacramento California, 95835 to Fort Worth Texas, 76244 | $2,500 | 931 miles |
Saint Charles Illinois, 60174-Greensboro Georgia, 30642 | $2,425 | 859 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
FAQs
In Idaho, what is the curfew for oversize loads?
In these cities, travel may be restricted from 6:30 a.m. to 8:30 a.m. and 4 p.m. to 6 p.m. Monday through Friday on highways and interstates within one mile of the city limits: Boise, Caldwell, Coeur d’Alene, Eagle, Emmett, Idaho Falls, Meridian, Middleton, Nampa, Pocatello, Star, Twin Falls, Garden.
What are Idaho’s oversize load regulations for 2023?
Generally, loads and vehicles transported on black and interstate routes under an annual oversize permit may not exceed sixteen (16′) feet in width, fifteen feet six inches (15’6”) in height, and one hundred ten (110′) feet in length including load overhang.
Are there any oversize rules in Idaho?
Providing the oversized vehicle doesn’t exceed 10 feet in width, 14 feet in height, or 120 feet in length, it can travel on Idaho roads at any time with proper signage and lighting.
Suggested links
Heavy Haul Job completed
2010 Caterpillar TL943 Telescopic ( 20ft long, 7.9 wide, 8 ft tall ). We dispatched out a lowboy trailer to pick up and when the driver arrived to the pick up site, the caterpillar didn’t run. So, we hired a crane service to come load the Caterpillar. No matter the situation we can always figure it out. For all your heavy haul moves give We Will Transport IT a call 877-880-5991