[templatera id=”65638″]
How Heavy Haul works from New Mexico to Texas
Book online
Pickup
Shipping
Delivery
Heavy Haulers from New Mexico to Texas
5 Star Heavy Equipment Transport Company from New Mexico to Texas for quality hauling. We provide stress-free machinery hauling from New Mexico to Texas and on-time delivery for local and long distances.
Heavy Equipment Transport from New Mexico to Texas
Do you need your heavy equipment shipped from New Mexico to Texas? We Will Transport It is the company to get the job done for you. We have over a decade of experience in heavy hauling. We Will Transport It specializes in heavy equipment hauling in all 50 states. We have a trailer for every size of equipment and a team of experts ready to get your unit moved. Whether you are shipping a full or partial load or even an oversized load, our knowledgeable representatives will handle every detail and keep you informed throughout the process.
The Route between New Mexico and Texas
New Mexico and Texas are neighboring states. The route from New Mexico to Texas runs east via US-84 East. The distance from the center of New Mexico to the center of Texas is 401 miles. The trip will take roughly 7 hours. The price to ship your heavy equipment or machinery will be based upon the number of miles your unit is going and the size and weight of the unit.
Below are some examples of prices to ship heavy equipment from New Mexico to Texas:
| From To | Shipping Quote | Miles |
|---|---|---|
| Roswell New Mexico, 88203-El Paso Texas, 79932 | $803.00 | 217 miles |
| Albuquerque New Mexico, 87107-Dallas Texas, 75225 | $2,401.00 | 649 miles |
| Lovington New Mexico, 88260-Lubbock Texas, 79404 | $459.00 | 124 miles |
| Rio Rancho New Mexico, 87144-San Antonio Texas, 78239 | $2,764.00 | 747 miles |
| Clovis New Mexico, 88101-Wilmer Texas, 75172 | $1,754.00 | 474 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
FAQs
How much does it cost to move a full load of equipment from NM to TX?
The average transportation cost between New Mexico and Texas is between $3 and $7 per mile. The cost of transportation mainly depends on the size and distance of the equipment. If you wish to obtain an accurate price, please contact your local broker.
Suggested links
- Heavy Equipment Transport From New Jersey To California
- New Mexico Heavy Equipment Transport
- Auto Transport New Mexico
- Moving containers New Mexico
- RV Transport Companies in New Mexico
Heavy haul Job completed from New Mexico to Texas
1986 Case Backhoe bought from an auction shipping to the customer’s house. We sent out a step deck trailer, but when the carrier got to the pickup end, the Backhoe did not run. We called a local wrecker service and had them load it for three hundred dollars. The carrier charged an additional $150 for their time, but we did the job. In logistics, we come across a lot of crazy situations, but we never stop till the job is completed.
