Get up to 10% off by calling now:
We are the Premier Vehicle, Boat, and Heavy Equipment Transportation Company in the US.
We will transport made my experience easy from pickup to delivery, great communication from the get go. Delivery was made ahead of time I will definitely use We will transport again in the future. 5 star service at an affordable price.
3 Million+ Vehicles Delivered
Serves All 50 states
(Finish your request to reveal)
How Heavy Haul Works from Wisconsin to North Dakota
Heavy Equipment Transport from Wisconsin to North Dakota
Would you like to have your heavy equipment transported from Wisconsin to North Dakota? It is We Will Transport It that will handle your transportation needs. With over a decade of experience in heavy hauling, we are well-positioned to assist you. We Will Transport It specializes in the transport of heavy equipment across all 50 states. A team of experienced professionals is ready to move every type of equipment. We have trailers for every size of equipment. If you are shipping a full or partial load or even an oversized load, our knowledgeable representatives will be able to handle every detail and keep you informed throughout the process.
The Route between Wisconsin and North Dakota
The route from Wisconsin to North Dakota runs west via I-94 West. From Wisconsin, your equipment will travel through Minnesota and into North Dakota. The distance from the center of Wisconsin to the center of North Dakota is about 734 miles. The trip will take roughly 12 hours. The price to ship your heavy equipment or machinery will be based on the number of miles your unit is going and the size and weight of the unit.
Below are some examples of prices to ship heavy equipment from Wisconsin to North Dakota:
|Hales Corners Wisconsin, 53130-Oxbow North Dakota, 58047
|Kenosha Wisconsin, 53142-Fargo North Dakota, 58104
|Hales Corners Wisconsin, 53130-Horace North Dakota, 58047
|New Richmond Wisconsin, 54017-Fargo North Dakota, 58102
* Prices shown above are from previous jobs completed in 2023; they fluctuate depending on diesel prices and the time of the year.
The most popular trailers we use:
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Container Trailer
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-dimension Loads
- FRV- Flatbed, Van, or Reefer
- FSDV- Flatbed, Step Deck, or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer, or Double drop
How much does shipping an oversized truck from Wisconsin to North Dakota cost?
The average price a carrier will accept for a large truck from Wisconsin to North Dakota is $1.75 to $3 a mile. There are a number of factors that can affect how much the truck weighs and how far it travels.
What is the cost of moving an excavator from Wisconsin to North Dakota?
Carriers charge between $3 and $5 per mile for transporting tractors between Wisconsin and North Dakota. A significant factor in this will be the size and distance traveled by the excavator.
What will a total flatbed equipment load cost from Wisconsin to North Dakota?
Typically, you can expect to pay anywhere from $5 to $9 a mile from Wisconsin to North Dakota. The price to move a whole load of equipment on a flatbed will vary, depending on the weight and the distance it’s moving.