Rich Table of Contents
- How Heavy Haul works from Connecticut to Georgia
- Heavy Haulers from Connecticut to Georgia
- Heavy Equipment Transport from Connecticut to Georgia
- The Route between Connecticut and Georgia
- Below are some examples of prices to ship heavy equipment from Connecticut to Georgia:
- The most popular trailers we use:
- FAQs
How Heavy Haul works from Connecticut to Georgia
Book online
Pickup
Shipping
Delivery
Heavy Haulers from Connecticut to Georgia
5 Star Heavy Equipment Transport Company from Connecticut to Georgia for quality hauling. We provide stress-free machinery hauling from Connecticut to Georgia and on-time delivery for local and long distance.
Heavy Equipment Transport from Connecticut to Georgia
Do you need your heavy equipment shipped from Connecticut? We Will Transport It is the company to do the job for you. We have over a decade of experience in heavy hauling. We Will Transport It specializes in heavy equipment hauling in all 50 states. We have a trailer for every equipment size and a team of experts ready to move your unit. Whether you are shipping a full or partial load or even an oversized load, our knowledgeable representatives will handle every detail and keep you informed throughout the process.
The Route between Connecticut and Georgia
The route from Connecticut to Georgia runs south via I-95 South. From Connecticut, your equipment will pass through New York, Pennsylvania, West Virginia, Virginia, North Carolina, and South Carolina before entering Georgia. The distance from the center of Connecticut to the center of Georgia is 1,015 miles. The trip will take roughly 17 hours. The price to ship your heavy equipment or machinery will be based upon the number of miles your unit is going and the size and weight of the unit.
Below are some examples of prices to ship heavy equipment from Connecticut to Georgia:
| From To | Shipping Quote | Miles |
|---|---|---|
| Stamford, Connecticut 06905 to Savannah, Georgia 31402 | $3,145.00 | 850 miles |
| South Windsor, Connecticut 06074 to Woodstock, Georgia 30188 | $3,767.00 | 1,018 miles |
| Darien, Connecticut 06820 to Newnan, Georgia 30263 | $3,534.00 | 955 miles |
| Bloomfield, Connecticut 06002 to Loganville, Georgia 30052 | $3,678.00 | 994 miles |
| Waterbury, Connecticut 06705 to Atlanta, Georgia 30344 | $3,656.00 | 988 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
FAQs
Where can I find a reliable equipment shipping company near me?
Call Heavy Equipment Transport if you are looking for a reliable company that ships equipment near you. We have drivers in every state who can haul your equipment. Our equipment shipping company has over 13 years experience and is the best and most reliable in the area.
Is a permit required in every state where my oversize load passes in Connecticut?
In fact, yes! Every state through which the driver transports your oversize load requires a permit. Oversize loads are handled by Heavy Equipment Transport, which handles permits, paperwork, and pilot cars.
What is the cost of shipping equipment across the country?
Several factors determine the cost of shipping your equipment across the country. Oversized equipment requires permits and possibly pilot cars. There is also the cost of fuel and tolls to consider. We recommend speaking with one of our expert logistic agents about transporting equipment from state to state. Your kit will be shipped across the country at an accurate and transparent cost.
Suggested links
Heavy Haul job done from from Connecticut to Georgia
Two 2010 Vermeer RTX1250s were shipped from Hartford, Connecticut, 06101 to Acworth, Georgia, 30101. Dimensions of each unit were 16 feet long, 8.5 feet wide, 9.7 feet tall, and 18,024 pounds. A 54-foot step deck with ramps was dispatched. A live tracking service provided by this truck sent text messages to keep track of the unit’s location at all times. The carrier delivered the equipment in two days.
