[templatera id=”65638″]
How Heavy Haul works from Connecticut to Texas
Book online
Pickup
Shipping
Delivery
Heavy Haulers from Connecticut to Texas
5 Star Heavy Equipment Transport Company from Connecticut to Texas for quality hauling. We provide stress-free machinery hauling from Connecticut to Texas and on-time delivery for local and long distance.
Heavy Equipment Transport from Connecticut to Texas
Do you need your heavy equipment shipped from Connecticut to Texas? We Will Transport It is the company to do the job for you. We have over a decade of experience in heavy hauling. We Will Transport It specializes in heavy equipment hauling in all 50 states. We have a trailer for every equipment size and a team of experts ready to move your unit. Whether you are shipping a full or partial load or even an oversized load, our knowledgeable representatives will handle every detail and keep you informed throughout the process.
The Route between Connecticut and Texas
The route from Connecticut to Texas runs south via I-81 South. From Connecticut, your equipment will travel through Pennsylvania, West Virginia, Virginia, Tennessee, and Arkansas before entering Texas. The distance from the center of Connecticut to the center of Texas is 1,867 miles. The trip will take roughly 28 hours. The price to ship your heavy equipment or machinery will be based upon the number of miles your unit is going and the size and weight of the unit.
Below are some examples of prices to ship heavy equipment from Connecticut to Texas:
| From To | Shipping Quote | Miles |
|---|---|---|
| Bridgeport, Connecticut 06610 to Fort Worth, Texas 76131 | $3,360.00 | 1,660 miles |
| Middlebury, Connecticut 06762 to Houston, Texas 77005 | $3,421.00 | 1,721 miles |
| Oxford, Connecticut 06478 to Wichita Falls, Texas 76305 | $3,374.00 | 1,674 miles |
| Manchester, Connecticut 06040 to Taft, Texas 78390 | $3,657.00 | 1,957 miles |
| Hartford, Connecticut 06103 to Dallas, Texas 75201 | $3,374.00 | 1,674 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
FAQs
How does Connecticut handle oversize permits?
There is a three-day validity period for Connecticut oversize permits. NO WORKING WEEKENDS OR HOLIDAYS; only daylight (from half an hour after sunrise until half an hour before sunset). We do not allow weekend travel for overweight loads. You cannot move from 6:30 a.m. to 9:00 a.m. or 4:30 p.m. to 6:30 p.m.
How much does a comprehensive load permit cost in Connecticut?
An Oversize/Overweight Single Trip Permit is required. A $30.00 fee is required for the base permit, and an additional $12.00 fee is required for the electronic transmittal.
Is a wide load considered a wide load in Massachusetts?
Weight: 130,500 pounds gross (see note below). Dimensions: 14′-12′′Width: 14′-12′′Height: 14′-12′′ (Over 13′-9′ requires a height survey). There are three types of tridems – single, tandem, and triple. The dimensions of these loads are considered super loads when they exceed them.
When does a wide load become a wide load in Connecticut?
It is necessary to review anything that exceeds the routine issue dimensions. Any load exceeding 10 feet wide requires an Oversize Load Sign. For loads over 8’6″, an 18″ red flag must be displayed at the widest point and at the four corners.
Suggested links
- Heavy Equipment Transport from Connecticut to Maryland
- Heavy Equipment Transport from Connecticut to Illinois
- Connecticut Heavy Equipment Transport
- RV Transport Connecticut
- Heavy Equipment Transport from Connecticut to California
Heavy Haul job completed from Connecticut to Texas
A client bought a 2002 Cat D10R Crawler Doze and needed it hauled to his construction site for a job starting Monday. Because this was a rush haul, we worked on it all night even though the customer called after hours. Once we located a flatbed driver, we told them to bring a friend so they could be a team and drive the equipment down to get to the job ASAP. The customer was very pleased with our service.
