Rich Table of Contents
- How Heavy Haul works from Maine to North Carolina
- Heavy Haulers from Maine to North Carolina
- Heavy Equipment Transport from Maine to North Carolina
- The Route between Maine and North Carolina
- In this example, heavy equipment will cost the following to ship from Maine to North Carolina:
- The most popular trailers we use:
- Faq’s
How Heavy Haul works from Maine to North Carolina
Book online
Pickup
Shipping
Delivery
Heavy Haulers from Maine to North Carolina
5 Star Heavy Equipment Transport Company from Maine to North Carolina for quality hauling. We provide stress-free machinery hauling from Maine to North Carolina and on-time delivery for local and long distance.
Heavy Equipment Transport from Maine to North Carolina
Do you need your heavy equipment shipped from Maine to North Carolina? We Will Transport It is the company to do the job for you. We have over a decade of experience in heavy hauling. We Will Transport It specializes in heavy equipment hauling in all 50 states. We have a trailer for every equipment size and a team of experts ready to move your unit. Whether you are shipping a full or partial load or even an oversized load, our knowledgeable representatives will handle every detail and keep you informed throughout the process.
The Route between Maine and North Carolina
The route from Maine to North Carolina runs south via I-95 South. From Maine, your equipment will pass through New Hampshire, Massachusetts, Connecticut, New York, Pennsylvania, Maryland, and Virginia before entering North Carolina. The distance from the center of Maine to the center of North Carolina is 957 miles. The trip will take roughly 15 hours. The price to ship your heavy equipment or machinery will be based on the number of miles your unit is going and the size and weight of the unit.
In this example, heavy equipment will cost the following to ship from Maine to North Carolina:
| From To | Shipping Quote | Miles |
|---|---|---|
| Portland, Maine 04103 to Wilmington, North Carolina 28411 | $2,757.00 | 919 miles |
| Brunswick, Maine 04011 to Lumberton, North Carolina 28358 | $2,748.00 | 916 miles |
| Bath, Maine 04530 to Saluda, North Carolina 28773 | $3,288.00 | 1,096 miles |
| Andover, Maine 04216 to Whitakers, North Carolina 27891 | $2,532.00 | 844 miles |
| South Portland, Maine 04106 to Charlotte, North Carolina 28262 | $2,907.00 | 969 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
Faq’s
What is the cost of moving a partial load from ME to NC?
The price to move a partial load from ME to NC will vary from 1.50 to $3 a mile. Depending on the weight and the distance.
Suggested links
Small Equipment Job Completed from Maine to North Carolina
2018 Tennant T16 Ride-On Floor Scrubber shipping from Ritchie Bros. Since the unit was very small, we sent out a flatbed trailer to pick it up, and the company helped load the Tennant on pickup; the customer had unloading on delivery.
