Rich Table of Contents
- How Heavy Haul works from Texas to New York
- Heavy Haulers from Texas to New York
- About We Will Transport It
- The Route Between Texas and New York
- Below are some examples of prices to ship heavy equipment from Texas to New York:
- The most popular trailers we use:
- FAQs
- Heavy Haul Job completed from Texas to New York
How Heavy Haul works from Texas to New York
Book online
Pickup
Shipping
Delivery
Heavy Haulers from Texas to New York
Premium Heavy Equipment Transport Company from Texas to New York for quality hauling. We provide stress-free machinery hauling from/to Texas to New York and on-time delivery for local and long distance.
About We Will Transport It
Are you in need of Heavy Hauling from Texas to New York or New York to Texas? We Will Transport It specializes in transporting heavy equipment and machinery to and from anywhere in the United States. With decades of experience and a team of knowledgeable industry experts, We Will Transport It will get your unit moved with ease. We have a trailer for any and all sizes of equipment. Whether you are shipping a crane, tractor, telehandler, or even a prefabricated home, we are the company to do the job at an honest and reasonable rate.
The Route Between Texas and New York
The route from Texas to New York runs Northeast via I-40 East and I-81 North. From Texas, your equipment will safely travel through Arkansas, Tennessee, Virginia, West Virginia, Pennsylvania, and then into New York. The distance from Texas to New York is 1770 miles on average. This number can vary largely depending on where in Texas you are shipping from. The trip generally takes between two and three days. The price will be based on the number of miles being traveled and the size and weight of the equipment.
Below are some examples of prices to ship heavy equipment from Texas to New York:
| From To | Shipping Quote | Miles |
|---|---|---|
| Austin Texas, 73301 to Brooklyn New York, 11235 | $2,600 | 1,756 miles |
| Dallas Texas, 75225 to Syracuse New York, 13210 | $2,350 | 1,530 miles |
| Fort Worth Texas, 76179 to Staten Island New York, 10303 | $2,400 | 1,591 miles |
| Houston Texas, 77032 to Bronx New York, 10472 | $2,500 | 1,655 miles |
| San Antonio Texas, 78227 to Watertown New York, 13601 | $2,700 | 1,862 miles |
* Prices shown above are from previous jobs we completed in 2023; they fluctuate depending on diesel and the time of the year.
The most popular trailers we use:
- Flatbed
- Two 24 or 28 flatebed
- Car carrier
- Beam Trailer
- Boat hauling Trailer
- Conestoga
- Container Trailer
- Driveaway
- Double drop
- Double Drop extended
- Dump Trucks
- Flatbed “Air Ride”
- FEXT ” Stretch Trailers or Extendable Flatbeds or Extendable Flatbeds
- FO- Flatbed over-Dimension Loads
- FRV- Flatbed, Van or Reefer
- FSDV- Flatbed, Step Deck or Van
- HS- Hotshot Trailer
- HTU- Haul and Tow Unit
- LAF- Landoll Flatbed
- LB- Lowboy
- LBO- Lowboy over dimension Loads
- MBHM- Mobile homes
- PO- Power Only
- RGN- Removable Gooseneck & Multi Axle Heavy Haulers
- Roll- Roll Top Conestoga
- SD- Stepdeck
- SDE – Stepdeck Extendable
- SDO- Step deck over Dimensions loads
- SPV- Cargo, small, sprinter Van
- VIVR- Venter insulated van or Refrigerated
- VLG- Van with Liftgate
- VRDD- Van, Reefer or Double drop
FAQs
How wide can you haul a load in Texas?
following are the maximum dimensions a load can have with a permit in the state of Texas:
- 180 feet is the maximum length with a permit.
- The maximum overhang with a permit is 25 feet in front and 30 feet in back.
- There is a maximum width of 20 feet with a permit.
- There is a maximum height of 18 feet with a permit.
How does Texas’ overlength law work?
An escort vehicle or pilot car may be required for overweight and oversize loads if: Length: If a shipment is over 110′ long and up to 125′ long, you will need 1 pilot car. If the length exceeds 125 feet, one pilot car or escort vehicle must be at the front and one at the rear of the vehicle.
What are the oversize transport permits in texas 2023?
- Permit for oversized single trips: $61.61.
- For loads weighing 80,001 to 120,000 pounds, overweight permits cost $210.
- A permit for loads weighing between 120,001 and 160,000 pounds costs $285.
- A permit for an overweight load between 160,001 and 200,000 pounds costs $360.
Suggested links
Heavy Haul Job completed from Texas to New York
2015 John Deere Tractor going from Irving, TX 75261 to Manhattan, NY 10024. Keep in mind certain areas in New York can cost the driver a lot of money becasue of tolls. For every axel the driver has on his truck, they charge per-axel. Our dispatchers found a flatebed trailer to pick up and it took four days for the carrier to deliver the unit. For all your freight shipments, give We Will Transport IT a call today 877-880-5991
